LambdaCalculator Construction calculators
My calculations
Settings

Skim coat quantity

Estimate skim coat mass and bags using area, application basis and product consumption.

Skim coat consumption

Label basis
m²
kg/(m²·coat)
%

Calculated result

Your result will appear here

Enter the measurements, then calculate.

Calculated in this browser.

How to use this calculator

Measurement guidance

Choose consumption per coat or per millimetre from the skim coat label. Use coats only in per-coat mode and thickness only in per-mm mode; check permitted coat thickness separately.

Method

M = A × n × c × (1 + p/100) ∨ A × t × c × (1 + p/100); Q = ⌈M / m⌉

A
area [m²]
n
coats
t
thickness [mm]
c
consumption [kg/m² ∨ kg/(m²·mm)]
m
package mass [kg]
p
allowance [%]

Worked example

Illustrative SI inputs. ⌈x⌉ rounds upward; ⌊x⌋ rounds downward. Use your product data and the units shown by the form.

  1. 20 m² × 2 × 1 kg/m² × 1.10 = 44 kg
  2. 20 m² × 2 mm × 1 kg/(m²·mm) × 1.10 = 44 kg
  3. ⌈44 kg / 20 kg⌉ = 3; 3 × 20 kg = 60 kg

A coat is not automatically a millimetre

Illustrative assumptions, not a product specification or recommended allowance. Replace them with your measurements and the selected product or system documentation.

Two hypothetical finishes cover 30 m² with 10% allowance and 20 kg packages. One specifies 2 coats at 0.60 kg/m² per coat; the other specifies 1.5 mm at 1.20 kg/(m²·mm).

30 × 2 × 0.60 × 1.10 = 39.60 kg; 30 × 1.5 × 1.20 × 1.10 = 59.40 kg

A coat is not automatically a millimetre
Specified applicationMass with allowance20 kg packages
2 × 0.60 kg/m²39.60 kg2
1.5 mm × 1.20 kg/(m²·mm)59.40 kg3

These are different specifications, not interchangeable ways to enter the same finish. Choose the mode that matches the label; do not multiply by both coat count and thickness.

Before ordering

  • Check the permitted layer thickness and the finish required. Extra material does not make a product suitable for filling deep unevenness or replace joint treatment.
  • Keep consumption and package mass on the same basis: dry powder or ready-mixed material. Check drying between coats; added water is not additional purchased product.

Sources

Current manufacturer label or technical data sheet for the exact selected product or system.

How to use this calculator

Methodology · Interior and drywall calculators