Drywall screws
Estimate drywall screws and boxes from boarded area, layers and specified screw consumption.
How to use this calculator
Measurement guidance
Enter the measured quantity and the screw rate for the same basis, then the box count. The fastening pattern, screw type and spacing must come from the selected drywall system.
Method
N = ⌈A × c × (1 + p/100)⌉; Q = ⌈N / n⌉
- A
- basis quantity
- c
- screws per basis
- n
- screws per box
- p
- allowance [%]
Worked example
Illustrative SI inputs. ⌈x⌉ rounds upward; ⌊x⌋ rounds downward. Use your product data and the units shown by the form.
- 30 m² × 20 / m² × 1.10 = 660
- ⌈660 / 500⌉ = 2; 2 × 500 = 1000; 1000 − 660 = 340
Compare boxes without changing the fixing specification
Illustrative assumptions, not a product specification or recommended allowance. Replace them with your measurements and the selected product or system documentation.
Assume 30 m², a hypothetical rate of 20 screws/m² and 10% allowance: 660 screws. Compare boxes of the same screw type and length.
30 × 20 × 1.10 = 660; 2 × 500 − 660 = 340; 4 × 200 − 660 = 140
| Screws per box | Boxes | Surplus screws |
|---|---|---|
| 500 | 2 | 340 |
| 200 | 4 | 140 |
Smaller boxes reduce the surplus here, but compare the total box price. The assumed rate of 20 screws/m² is not a fastening recommendation.
Before ordering
- Check whether the system rate covers one face, both faces or multiple layers. Do not multiply a rate that already includes those layers a second time.
- Calculate each specified screw type and length separately; a surplus of one type does not replace another.
Sources
Current manufacturer label or technical data sheet for the exact selected product or system.