Purchase planning
Masonry element quantity
Count blocks or bricks and whole packages from net wall area and product consumption per square metre.
How to use this calculator
Calculation method — version 2
Net area = gross area − openings. Product consumption × net area × (1 + allowance / 100) gives the planned element quantity. Round elements upward, then buy whole packages. Fully deducted area produces zero required elements.
Data and scope
Read consumption per m² from the exact product documents for the wall thickness and joints. The result covers element purchasing; system selection, mortar, lintels and structural assessment require separate data.
From measurements to a purchase
Worked examples use hypothetical product data, prices and allowances. Replace them with your measurements and the current supplier documents.
Measure gross wall area and openings separately. Obtain elements per m² for the exact unit, wall thickness and joint arrangement; nominal block dimensions alone may omit joints. For 20 m² gross minus 2 m² openings, 12.5 elements/m² and 5% allowance, the plan is 236.25 elements, rounded to 237.
With 60 elements per package, buy 4 packages containing 240 elements: 3 more than the rounded requirement. For the purchase-cost tool, use 4 packages with package contents 1 and allowance 0%, then enter the price per package. Mortar, lintels, special units and structural suitability need separate checks.
Next step
Estimate the purchase costCalculations run locally. Recent receives calculator metadata only.
A UK product: consumption and whole packs
H+H Celcon Blocks, 440 × 215 × 100 mm. These figures describe the named product and packing option. Use the product's declared consumption and its matching pack quantity in the calculator.
- Declared product consumption
- 9.88 blocks/m²
- Blocks per pack
- 120 blocks
- Joint thickness for this rate
- 10 mm
Check the worked example in the calculator
Wall area, openings and allowance are assumptions for this example. The product consumption and pack quantity come from the linked source.
- Gross wall area
- 24 m²
- Openings
- 4 m²
- Example allowance
- 5%
- Net wall area
- 20 m²
- Before allowance
- 197.6 blocks
- After allowance
- 207.48 blocks
- Whole blocks needed
- 208 blocks
- Whole packs
- 2
- Purchased blocks
- 240 blocks
- Surplus above the whole-block requirement
- 32 blocks
Enter these values in the calculator above and apply the allowance once. Match the product and packing option to your current supplier quote. Go to the calculator.
Source: H+H — Pack Information, first table, 100 mm column. Source checked: .