LambdaCalculator Construction calculators
My calculations
Settings

Plaster quantity

Calculate plaster mass and whole bags from area, thickness and the product's stated consumption.

Plaster consumption

Label basis
m²
kg/(m²·mm)
%

Calculated result

Your result will appear here

Enter the measurements, then calculate.

Calculated in this browser.

How to use this calculator

Measurement guidance

Measure the plastered area and copy the consumption basis from the product. Multiply by thickness only for kg/(m²·mm); a rate for the finished thickness already includes it.

Method

M = A × t × c × (1 + p/100) ∨ A × c × (1 + p/100); Q = ⌈M / m⌉

A
area [m²]
t
thickness [mm]
c
consumption [kg/(m²·mm) ∨ kg/m²]
m
package mass [kg]
p
allowance [%]

Worked example

Illustrative SI inputs. ⌈x⌉ rounds upward; ⌊x⌋ rounds downward. Use your product data and the units shown by the form.

  1. 20 m² × 10 mm × 1 kg/(m²·mm) × 1.10 = 220 kg
  2. 20 m² × 10 kg/m² × 1.10 = 220 kg
  3. ⌈220 kg / 25 kg⌉ = 9; 9 × 25 kg = 225 kg

Measure uneven areas before rounding to bags

Illustrative assumptions, not a product specification or recommended allowance. Replace them with your measurements and the selected product or system documentation.

For the same hypothetical dry plaster, take 20 m² at 8 mm and 10 m² at 15 mm, consumption 1 kg/(m²·mm), 10% allowance and 25 kg bags. Calculate each area separately.

20 × 8 × 1 × 1.10 = 176 kg; 10 × 15 × 1 × 1.10 = 165 kg; ⌈341 / 25⌉ = 14

Measure uneven areas before rounding to bags
Area and thicknessMass with allowanceBags if ordered separately
20 m² × 8 mm176 kg8
10 m² × 15 mm165 kg7

Together the areas need 341 kg: 14 bags supply 350 kg. Separate orders round to 8 + 7 = 15 bags. Combine masses before rounding only when both areas use the same product and package.

Before ordering

  • Measure thickness in representative areas; a simple average of unequal areas can misstate consumption. Check permitted thickness and substrate preparation in the product documentation.
  • Multiply by thickness only for a rate per millimetre. A kg/m² rate for a stated finished thickness already includes it; mixing water is not dry plaster to buy.

Sources

Current manufacturer label or technical data sheet for the exact selected product or system.

How to use this calculator

Methodology · Interior and drywall calculators