Room area calculator
Calculate a rectangular room area, an explicit waste allowance and complete packages from the coverage printed on the product.
How to use this calculator
How to measure
Measure the finished internal length and width at floor level. Split an irregular room into non-overlapping rectangles; the calculator accepts one rectangle at a time.
Worked example
A 4 m × 5 m room is 20 m². With 10% waste the plan is 22 m². Packs covering 2.5 m² require 9 complete packs, or 22.5 m² purchased.
Formula and purchasing method
net area = length × width; planned area = net area × (1 + waste/100); packages = ceil(planned area ÷ coverage per package).
Combine areas before rounding the order
Illustrative assumptions, not a product specification or recommended allowance. Replace them with your measurements and the selected product or system documentation.
Two non-overlapping rectangles measure 3 × 4 m and 2 × 3 m. Use the same product, 10% allowance and packs covering 2.5 m². Compare a shared order with separate orders.
(3 × 4 + 2 × 3) × 1.10 = 19.8 m²; 19.8 / 2.5 = 7.92 → 8
| Calculation | Before final rounding | Packs |
|---|---|---|
| 12 m² + 6 m² | 19.8 m² | 8 |
| 13.2 m² + 6.6 m² | 6 + 3 | 9 |
The shared order needs 8 packs covering 20 m². Rounding each zone separately gives 9 packs. The calculator handles one rectangle at a time: add its planned areas manually, then divide the total by pack coverage and round up once.
Before ordering
- Do not count the missing corner of an L-shaped room, or count an overlapping zone twice.
- Combine only compatible product variants. Check the cutting plan; an area allowance does not prove that remnants will fit.
Assumptions
- The measured zone is rectangular.
- Package coverage is copied from the selected product label.
Limitations
- The calculator does not combine zones or deduct overlaps.
- Cuts, pattern direction and unusable remnants are represented only by the waste input.
FAQ
Can I enter a non-rectangular room?
Add the planned areas of the non-overlapping rectangles manually. For a shared order of the same product, divide the total by package coverage before rounding up.
Why are packages rounded up?
Retail packages are indivisible, so any fraction requires the next complete package.
Sources
Product-specific values must be copied from the exact current label or technical datasheet; linked examples document the method and its limits.
Calculation privacy
Calculations run locally. Form inputs and results stay in your browser.
How storage works and how to delete data