LambdaCalculator Construction calculators
My calculations
Settings

Guided project

Paint a room

Measure walls, then choose the paint estimate that matches your available inputs.

Turn measured wall surfaces and product coverage into a material quantity.

Your project workflow

Work from top to bottom. Optional steps can be skipped; alternatives are grouped into one decision.

Check completed steps. You can skip optional steps.
  1. 1

    Step 1

    Measure wall area

    Establish the wall surface and openings before estimating material.

    Use Wall area calculator
  2. 2

    Step 2

    Choose one approach

    Use the option that matches the measurements you already have.

  3. 3

    Optional

    Estimate the purchase cost

    Use the quantity from your chosen calculator and the supplier's package price.

    Use Material purchase cost

Worked route: measured walls to paint and cost

  1. Measure walls and deduct openings once. A 4 m × 5 m room at 2.5 m height, less 5 m² of openings, has 40 m² of walls without the ceiling.
  2. Choose the room method or the known-surface method for the same surface. Two coats at illustrative 10 m²/L need 8 L net. Use the surface method if adding a separate allowance: 10% gives 8.8 L.
  3. Price the selected paint and container size below. Keep primer, ceiling paint and different colours as separate purchases with their own labels.

Price the selected containers

In the material purchase cost calculator, enter 8.8 L required, litres as the quantity unit, 0% additional allowance, 5 L per package and a hypothetical price of £28.50 per package in GBP. With a delivery charge of £0, the result is two packages, 10 L purchased and £57.00. Copy the planned litres into the form manually; the link does not transfer your inputs. Adding 10% again would count the same allowance twice.

These are worked inputs, not a product specification or live price. Use the selected paint label for coats, coverage and container volume. Surface preparation, absorption, primer and different products need separate checks. Do not combine different colours or finishes into one container calculation.

Guidance for this job