LambdaCalculator Construction calculators
My calculations
Settings

Electronics

LED series resistor calculator

Calculate resistance and resistor power for one series LED string. Check the estimated current and power with a resistor you enter.

Series LED circuit

Example values are editable assumptions. Use a decimal point or comma without thousands separators.

V
V
Use a value appropriate to your LED and operating conditions, not a universal value based on colour.
mA

Calculated dissipation is not a selected resistor wattage rating. Check component data and temperature derating separately.

Calculated result

Your result will appear here

Enter the measurements, then calculate.

Calculated in this browser.

One resistor and one series LED string

This calculator models a DC supply feeding one resistor and a single series string of identical LEDs. Enter the supply voltage, the number of LEDs, forward voltage per LED and target current from the relevant component data. Forward voltage changes with current and temperature, so the result is an estimate.

For parallel strings, evaluate each string and its own current-limiting arrangement separately. This model does not cover mains circuits, switching drivers or LEDs with a built-in driver.

Resistance, current and power

With n LEDs, the resistor voltage is Vr = Vs − n × Vf. The supply must exceed the total forward voltage. For target current I in amperes, R = Vr / I and resistor dissipation P = Vr × I.

If you enter an available resistance Rs, the estimated current becomes Is = Vr / Rs and dissipation becomes Ps = Vr² / Rs. Selecting Ω or kΩ, or A or mA, converts the displayed quantity. Editing the value creates a new input in the displayed unit.

The dissipation result is not a recommended resistor power rating. Component ratings, tolerances, temperature derating, supply variation and LED operating limits require separate checks. No universal forward voltage is inferred from LED colour.

Example: 5 V supply and one LED

Assume Vs = 5 V, n = 1, Vf = 2 V and target I = 10 mA = 0.01 A. These are hypothetical inputs, not component recommendations.

  • Resistor voltage: 5 − 2 = 3 V.
  • Target resistance: 3 / 0.01 = 300 Ω.
  • Dissipation at target current: 3 × 0.01 = 0.03 W = 30 mW.
  • With a user-entered 330 Ω resistor: current ≈ 9.09 mA and dissipation ≈ 27.27 mW.

Why is there no result when Vs equals the LED voltage?

At Vs ≤ n × Vf, this resistor-drop model has no positive voltage headroom for the requested current. The calculator reports an input error rather than recommending a zero or negative resistance. A different supply or current-control design needs separate evaluation.

Source and scope

Adafruit: Let’s Put LEDs in Things! — From Scratch explains the basic LED series-resistor relationship. The example and calculations here are original. The source does not establish a universal component value or a legal requirement.